Wax production is perfectly normal and the wearing of hearing aids can actually make you produce more wax. If there is any wax in the tubing of the ear mould, detach the tube from the body of the hearing aid.
You should take careful note of your wax filter and change it when needed.
How to clean hearing aids of wax. Gently brush the microphone cover, receiver, and vent openings to remove wax or debris. Filters and hearing aid wax guards. Gently wipe down the entire hearing aid using a dry, clean cloth that doesn’t generate lint, such as an eyeglass cleaner cloth or a clean blue shop towel.
Establish a routine for cleaning your hearing aids so it is done on a consistent basis. Make sure your hands are clean and dry before handling your hearing aids. Clean out any debris or ear wax from the tubing, removing any blockages that could stop you from hearing.
The wax loop or brush from a cleaning kit are the best tools to gently scoop any wax away from the opening of the sound tip. How do i clean the wax out of my hearing aid? Take care to wipe away from the ports rather than toward them, as this will help keep dirt and wax out of the hearing aid.
To keep the hearing aid clean use a brush and pick to clean the wax from the hearing aid. Buy a hearing aid dryer. When you have finished wearing your hearing aids, you place them in the box and close the lid, which creates a vacuum inside of the box.
Remove the earmold from the hearing aid and clean it. Carefully clean it out by gently blowing through the. Practice good hygiene remove your hearing aids while you do your cleanliness routine such as when you wash and shower your hair and face.
Wait till your hearing device is completely dry, then use a dry cloth to wipe away any excess earwax. To counteract the above problems, your hearing aids will be fitted with a wax guard, but you need to monitor this guard. Value hearing recommends you regularly wash your microfibre cleaning cloth to help clean your hearing aids.
This is a very useful tool for keeping the wax out of your hearing aids. If the wax is still visible, use the tools in your cleaning kit to remove it safely. Use the supplied cleaning cloth to wipe away any dirt or debris.
You should invest in a drying kit, simple kits will cost you not much more than a tenner, and they will ensure your hearing aids keep going for longer. For larger vents, run a vent cleaner carefully through the opening in each direction. Once the wire pops out of the tip, make sure to wipe off the end of the cleaning wire with a tissue or a microfiber cloth to remove the debris.
They may require a simple wipe or clean with the tiny brush supplied with the aids or perhaps the changing of a wax protector incorporated into your aid. Hold the device with the opening you are cleaning facing downward so any loose particles will fall out of the hearing aid instead of staying lodged inside. Next, use a wax pick or hook to clear anything out of the holes that didn’t come out with the brush.
Gently remove the debris from the earmold and start cleaning the wax guards. Leave hearing aids out during your hygiene routine. The best thing is that it's easy to use and cheap.
Once wax build up reaches approximately 80% occlusion within the canal, hearing starts to diminish*. Use the wax pick/wire loop to remove stubborn material from the air vent. Using the brush provided with your hearing aid, gently remove any wax or debris from the device.
Begin by wiping your hearing aids with a clean, dry cloth. To keep the hearing aid clean use a brush and pick to clean the wax from the hearing aid. If you call us we can identify if it is a simple cleaning and talk you through it.
Wax hardens overnight, making it easier to brush away in the morning. Do not clean your wax guards with water, alcohol, and rectified spirit. A cleaning wire and brush are two important pieces of equipment that can help you tackle wax buildup, one of the most common causes of malfunctioning hearing aids.
Wipe down the entire hearing aid gently with a soft cloth. In essence, you should wipe your hearing aids with a clean dry cloth to remove oil and ear wax. It will keep your hearing aid dry and clean.
Brush downwards to help the loosened wax to fall away from the microphones. Using the brush provided with your hearing aid, gently remove any wax or debris from the ear mould and main device. Finally, pull the cleaning back out through the tubing.
Excessive earwax can cause muffled sounds or feedback , neither of which are enjoyable for hearing aid wearers.