Here is a link that might be useful: You will need to find a source for the little rare earth (neodymium) magnets, but they’re relatively easy to find and inexpensive.
If you loosened the light fixture (after having turned off the circuit breaker for it, back at breaker panel) you might be able to get a look in there.
How to find a stud in the porch ceiling. Finding joists in porch ceiling for install a wood plank ceiling extreme why beadboard on the ceiling is nothing building a porch roof framing. I have tried a stud finder outside, but am having no luck with that, i am assuming due to all the bulk created by the vinyl. Activate the device's deep scanning option.
If it doesn't find a joist, measure 24 inches from the wall and try that area instead. Finding joists in porch ceiling for plant hooks. If it doesn't find a joist, measure 24 inches from the wall and try that area instead.
1 use a magnet using the high power magnet is one of the simplest and affordable ways to find studs under the ceiling. Use the stud finder that you have and confirm the location by drilling a small hole. You move the magnet across your ceiling until the magnet reacts.
If you have access to the attic, measure from a sidewall to the nearest parallel joist and then transfer that measurement to the ceiling below. This post was edited by homebound on wed, may 29, 13 at 10:37 Using a stud finder or stud finder app are foolproof ways to find wall studs, but.
How to find a stud in the porch ceiling shelly lighting october 18, 2018 install a wood plank ceiling extreme ledger board on existing stucco wall rise and run building a porch roof parts of a porch decks com A stud finder is impractical on plaster, and tapping is useless. Which one do you have now?
Shelly lighting october 14, 2018. Let's provide some tips for locating a stud the old fashioned way. You can get them at hardware stores.
You should be able to find the stud using a magnet, tape measure and a nail and hammer. But not all homeowners own a stud finder, and probably don't need one often enough to justify the purchase. There’s no math, no poking holes with nails, and no measuring.
Hope you manage to get it up soon. Use a stud finder if you love any excuse to use a tool or gadget, then a stud finder may be your preferred method of locating a stud or ceiling joist. Or use a small rare earth magnet to find the screws/nails in your joists.
If yours is like this, be careful. Trying to find studs in the wall can be frustrating. Get a better stud finder.
The first step to hanging a porch swing is to locate the ceiling joists where your swing will be hung from. Knock along the wall near where you think a stud might be located. How to find stud in porch ceiling.
Or the box might be nailed right to a ceiling joist. If you love any excuse to use a tool or gadget, then a stud finder may be your preferred method of locating a stud or ceiling joist. How to find a stud without a stud finder.
The simple solution is to use a stud finder, which range anywhere from $10 to $50. How to find a beam in the ceiling without stud finder. Install a wood plank ceiling.
When the stud finder beeps again youve found the other edge of the stud. When it lights up, it has reached the edge of a joist. Our porch ceiling is made of wood slats, many of which seem to run the entire width of the porch.
But if you don’t have one, here are some techniques that you can try. The ceiling joists were 2ft apart. Drill a small hole, insert a coat hanger bent to 90 degrees and about 12 long into the hole and then rotate it until it hits the adjacent studs.
Magnetic stud detectors find studs and joists by detecting the nails in them. How do you find studs to hang a porch swing? Joist holders, nails and other key ceiling elements are made from metal.
You simply sweep the detector over the surface until it beeps or flashes to signal that a stud. Our (1920s) house has tongue and groove boards for a porch ceiling. The key would be to find the seams where the pieces join.
The two methods above are about as simple as it gets. I was able to find them with a magnetic. There is vinyl siding over the ceiling on the porch.
How to find stud in porch ceiling. I'm having a terrible time finding the ceiling joists. The other seams are just for looks and won't have any joists under them.
Whether you're mounting a television or hanging a coat rack, you'll be required to find a stud in your drywall. If it doesn't find a joist, measure 24 inches from the wall and try that area instead. Run the stud finder over the ceiling in that area.
Or the box might be nailed right to a ceiling joist. I have the magnets and have found one length from the outside wall to the inside wall where the magnets stick. Joist holders, nails and other key ceiling elements are made from metal.
When my studfinder failed i did this to locate a chimney for my wood stove. Using a thin piece plywood or shim to bang on, you can hold that against the ceiling and bang with a hammer to hear the hollow and solid spots without damaging your ceiling. Or you have to measure 24 inches to find the stud.
Simply use a tape measure to pull measurements from the location of the stud or joist youve discovered. The joists are the strongest part of your porch ceiling and they can handle the weight of the swing plus the additional weight of its passengers. Then you can hit the nail into that spot to find the stud.
It’s super simple to find studs with magnets. How to find stud in porch ceiling. Run the stud finder over the ceiling in that area.
There might also be a bit of a gap around the electrical box for that ceiling fixture. How to find a stud without a stud finder.