Press and hold the odometer reset. So today, i’m going to show you how to reset the maintenance light on your toyota tacoma.
Some models don’t have the odo/trip button.
How to reset toyota tacoma maintenance light. If they forgot to, or you are servicing the car yourself then you can turn it off. If your vehicle has an ignition button, press the start/stop button two times without step on the brake pedal. Hold the meter reset until the maint reqd light.
To disable it all you have to do is start with the vehicle off. While holding reset button, switch ignition to on position. How to reset the maint reqd light on a toyota tacoma.
On most toyotas you simply: It comes on 5,000 miles after the last time it was reset. Insert your car key into the ignition, and turn it to “on” but don’t start the car.
Icon on the info display.use the up and down arrows to select “settings“, then press.use the arrows to select “maintenance reset“, then press.select “yes“, then push. Turn the key to the on. After that, you can go down towards the bottom to the maintenance reset then hit ok to enter.
To reset maintenance required light toyota tacoma and that can be made manually by use button on car dashboard. The flashing dashboard light will go off and the reading on the odometer will reset. Press and hold the trip meter reset nob (next to your toyota tacoma's odometer).
We have a 2008 tacoma here, so let me show you how that is done. Resetting the toyota maintenance required light is fairly easy. Push and hold the trip meter reset button on the dashboard, then turn the key to position two.
Follow the steps below to reset your toyota maintenance light: Turn your ignition key to the 'acc' or 'lock' position. To reset the 2005 toyota tacoma maintenance light, please follow these instructions:
This is how you turn off the maintenance light on a prius. When you turn off the maintenance light, ensure that the odometer displays the total mileage, especially the a display. Press and hold odo/trip button and turn ignition to the “run” position.
Continue to hold the trip reset button and turn the key back to the “off. Press and hold the trip meter reset nob (next to your toyota tacoma's odometer). The odometer should display the miles, not the trip meter.
The maintenance light on a toyota tacoma is there to remind you to get your vehicle to a shop to get services done on it. What does the maintenance required light mean on a 2009 toyota tacoma? How to reset oil maintenance required light toyota tacoma 2016 2020.
Turn the ignition to run (one position before starting engine). Press the odo/trip button to display to trip a. Turn the ignition switch off.
Turn the ignition key off push the trip reset button and hold wile turning ignition on. Press and hold the trip meter reset nob, and hold until the maintenance required light goes off. When the vehicle is turned off, push and hold the odo reset button.
When a confirmation message appears, select yes, and the maintenance reset is complete After an oil change, you should reset your maintenance required light on your toyota tacoma. How to reset oil maintenance required light on toyota tacoma.
This light comes on to remind you to change your oil. Push and hold down the odo button and push the power button twice with your foot off the brake. Usually a dealership or shop will turn this light off when they are done with the services.
To reset the maintenance light on a 2012 toyota tacoma, put the key in the acc' or 'lock' position. For toyota tacoma years 2006, 2007,2008 models the oil reset maintenance light system can also be reset as follows: The light appearing on your vehicle’s dashboard can be reset by following.
If your toyota tacoma is on, then turn it off. While holding the trip meter reset nob, turn the ignition to 'on', but do not start your toyota tacoma. Put the key to the on position but don’t start the car.
How to reset maintenance light on toyota tacoma 2016. Next, turn off the ignitionafter that, you’re gonna need to hold down the odo/ trip button and then turn the car on again without cranking the enginekeep press the odo/ trip button until the maintenance required light shuts off Click and hold the trip reset button located near the odometer until you see “trip a” appear on the center screen.