Pull the trigger back and place the lock bar underneath the baiting platform (be careful not to get your fingers caught, as the trigger is sensitive and can go off. Once the staple is removed, take the arm bar and hang it back off the trap as shown in the picture below.
Next place bait on the metal bait pedal.
How to set a large victor mouse trap. Lift the gray bait cover. Take advantage of the ability to adjust the sensitivity of your traps for optimum results. Remove the staple to enable you to pull back the arm;
Put a bit of peanut butter inside the trap and fasten the lid. Close the gray bait cover. Set up the mouse traps.
To ensure you’ll catch the mouse quickly, place the trap somewhere between the nest and the food. If your plan is to set a snap trap, simply follow these steps: This victor ® mouse trap is simple to use.
To set the trap, start by releasing the arm bar from the staple and moving it to the back of the trap so it hangs over the edge. You have a few different options for bait but peanut butter works the best. Apply a small amount of bait to the yellow plastic pedal.
Like most traps, the first step to preparing your live catch trap is to bait it. Bait the trap using peanut butter, or anything high in protein like chocolate or hazelnut spread in the bait trough provided. The majority of the time you would simply set your traps with the locking bar in the middle.
The trap will be easier to set on the firm side, but not trip as easy. Place the trap or traps near where you see mouse traffic and wait. The victor plastic pedal mouse trap enhances the classic snap trap design by adding a large plastic trip pedal to increase catch rates.
If you have an easy set rat trap, set the kill bar as far back as possible to trigger the sensitive setting. This larger trap can hold up to 30 mice before it needs to be emptied, making it ideal for larger infestations. The victor m310s is extremely easy to use.
How to set a victor traditional mouse trap | domyown.com. Select a bait such as peanut butter, hazelnut spread, marshmallows, or beef jerky. The victor plastic pedal mouse trap enhances the classic snap trap design by adding a large plastic trip pedal to increase catch rates.
Mice are most likely to pass by the wall, which is where you should place the trap.check your trap often, and if there’s no mouse after a few days, put the trap in a different area. Click here to learn more about how to catch a rat. As this is a live catch mouse trap, there is no ‘snap’ trigger to set.
The sensitive setting will be easily triggered to catch that elusive rodent. That means you will not hurt your fingers when setting the trap! Mice love to eat peanut butter and the peanut butter sticks easily to the bait pedal.
Apply a small amount of bait to the yellow plastic pedal. If using a tin cat® mouse trap, start by opening the lid. Take the armbar and lift it over the kill bar, latching it under the bait pedal.
Take note of the firm and sensitive setting. Pull the kill bar back and hold it in place with your thumb. The trap will be more difficult to set on the sensitive side, but trip very easily.
The kill bar is the rectangular metal piece along the top end of your rat trap. That is good news for clumsy folks like me. Place bait onto the trigger;
Lift the lid, apply the bait, close the lid and wait for the mice to stroll in. To set the trap, start by releasing the arm bar from the staple and moving it to the back of the trap so it hangs over the edge.
Kat Sense Pest Control Rat Traps Professional Multi Captsure Set Of 6 Large Snap Trap Infestation Solutions For Indoor Outdoor Antirodent Protection Reusable In 2021 Rat Traps Best Mouse Trap Mouse Traps