How To Turn Off Gas Fireplace Without Key

Second, if there is a glass panel on the fireplace, remove it. Gas fireplace with the pilot always on, has a hole with key in it on the floor right next to fireplace (based on prior answers thats for gas supply), a ‘light’ switch across the room that when flipped on basically turns the flames on and entire fireplace lights up, then a knob next to the light switch that when turned clockwise increase the size of flame, and vice versa.

How To Light A Gas Fireplace

Table of Contents

When learning how to turn on a gas fireplace without a key, see if the unit has a control panel with an igniter switch.

How to turn off gas fireplace without key. The video walks through the simple steps on starting and operating a gas fireplace. Simply turn the key in a clockwise position to shut the gas supply. Usually a key is used for the main gas shutoff and is not used for daily on/off.

The requirements for a gas fireplace shutoff valve are at 409.5 in the international fuel gas code (ifgc). The first and most critical step is to shut off the valve or pilot light to the gas fireplace before using the highly flammable spray paint. The flame may be located in the back or behind some of your logs.

When you are done using the gas fireplace, insert the key into the keyhole and turn it clockwise until it no longer turns to turn off the gas and extinguishe the flame. Be sure that the pilot knob is in the “off” position. This step makes the task easier, but it may not be completely necessary.

If you have tried to light the fireplace but nothing is happening, first check that the gas valve is in the on position and emitting gas. You should begin to hear a clicking sound. Make sure that the gas is on before turning on your new fireplace.

If it won't turn in one direction try the other way until the handle is 1/4 turn from its previous position. It goes without saying that before you start cutting wires, make sure that you have either disconnected all power, or shut off the electricity at the circuit breaker. Make sure that the gas is on before turning on your new fireplace.

Heatilator® gas fireplace operation video. Turn the switch to off. there may be a wall switch that allows you to turn your burner on. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money.

If your unit does have a fireplace key, remove the front cover of the fireplace so you can access the burner. Hunker may earn compensation through affiliate links in this story. If nothing happens and the gas is on, turn the gas off again, and call a technician for an inspection and service.

I am not saying don't follow codes but go even one better. Gas shut offs are 1/4 turn open or closed. Just think about what you would do in an emergency.

Put the pilot light starter in the ignite position and press down on the knob firmly. Turn the switch to off. a slide switch on the receiver has been moved to the on position. Turn the switch to off.

Turn the control knob to the off position for at least 5 minutes. If the system involves opening a gas valve with a fireplace key, use a long match or lighter. Wait five to ten minutes to allow any excess gas to clear out of the line.

One way is on one way is off. Some older gas fireplaces have keys. There is a key in the stone area, but we do not have a remote.

The best way to determine if you have this type of gas fireplace is to look at the control knob of the fireplace. 2) within 6 feet of the appliance. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

If the knob is not in the off position, turn it so that it is. It covers start up, flame & heat output and fan adjustment. Code or no code common sense here if i had a gas fireplace that had a shutoff that needed a key i would permanently attach a key to it somehow or i would have a backup valve to be able to shut off fast no key.

The key also allows for control of the flame height. Ask your own hvac question 1) be located in the same room as the fireplace.

If you’re using a fireplace key and your fireplace. It measures heat from the pilot flame on the thermocouple, and if anything is even slightly off, the valve will snap closed and shut off the fire. The requirements for a gas fireplace shutoff valve are at 409.5 in the international fuel gas code (ifgc).

How to turn off pilot light on a gas fireplace. We cannot get the gas fireplace to turn off. Then turn the valve control located under the fireplace.

It is a victorian fireplace and appreciate new gas fires probably aren't set up like this anymore! If you don’t know how, refer to the manufacturer’s manual. There may be a wall switch that allows you to turn.

So need to turn the gas cock tap on to turn the gas on to the fireplace to light it, and then turn off when not in use. There are two easy pilot adjustments that can be made. 2) within 6 feet of the appliance.

On most gas fireplace models, you can remove the screen by simply tugging it off the device. 1) be located in the same room as the fireplace. Look for a knob on your control panel with the words on, off, and pilot on it.

First, make sure that the pilot is lit. Usually there is a rocker switch that is located around your burner which, if in the on position, it will override the remote. Units with standing pilots are a little different.

The wisdom of automating a gas fireplace is also debatable, however, i left the manual switch in place so you can always turn off the fireplace the “old fashioned” way using.

What Is This Knob For On My Fireplace – Home Improvement Stack Exchange